1250 Total devices
Ko-Fi

News

Sonoff Is Launching Dual-Protocol Thread and Zigbee Sensors

Sonoff adds dual-protocol Matter over Thread and Zigbee 3.0 to its SenseGuard line. The DW Gen3 door sensor is out now, with the Motion Gen3 coming soon.

Photo of author

Written by

Simeon M.

Sonoff has begun rolling out new Matter over Thread devices, starting with its SenseGuard smart sensor line. The company is adding Thread for the first time with two battery-powered models: the SenseGuard DW Gen3 Door and Window sensor, which is already available, and the upcoming SenseGuard Motion Gen3 motion sensor.

Sonoff Releasing New Matter over Thread Sensors

Both are dual protocol devices that run on Thread or Zigbee 3.0. Sonoff seems to be following in Aqara’s footsteps here, which gives users the best of both worlds: they can pick the protocol that works with their preferred platform.

Sonoff calls this the first step toward a broader Thread sensor lineup, so more devices should follow. The DW Gen3 is already listed on Sonoff’s store for €22.90/US$22.90 as well as on Amazon for US$22.90, while the Motion Gen3 will cost €24.90/US$24.90 and is expected sometime in late November. Sonoff has also released a Matter over Wi-Fi presence sensor from the same series.

Two Sensors Built on Sonoff’s Zigbee Designs

Both devices carry over features from their Zigbee predecessors. They run on a Telink TL3238 chip that handles both Thread and Zigbee on the same radio, with a rated range of up to 100 m in open space. The SenseGuard DW Gen3 (SNZT-04P), which is Sonoff’s first-ever Thread sensor, is based on the SNZB-04PR2 and runs on two AAA batteries with a rated battery life of three years.

Interestingly, the Zigbee version is rated for a 5-year battery life. This door and window sensor has a detachable magnet, a maximum detection gap of 30 mm for horizontal mounting and 15 mm for vertical, as well as a tamper button on the back.

Sonoff Zigbee Motion Sensor SNZB-03PR2
The SONOFF SenseGuard Motion Gen2 (SNZB-03PR2) is the Zigbee predecessor of the Motion Gen3.

The Motion Gen3 (SNZT-03P) is based on the SNZB-03PR2 and uses a CR2477 battery instead. Its PIR sensor covers about 6 m at 110 degrees, a selectable cooldown between 5 and 60 seconds with a default of 60. The main improvement over the SNZB-03P is a separate light sensor that reports lux values, keeps up to six months of history and supports an offset of up to 1000 lux. You can use light as its own trigger or combine it with motion.

What Changes Between Thread and Zigbee Mode

Out of the box, both sensors enter Thread pairing mode. Pressing the button five times switches to Zigbee mode, which also fully resets the device. In Thread mode, they pair with Apple Home, Google Home, Alexa, SmartThings and Home Assistant, each requiring a Thread-capable Matter hub from the ecosystem.

Feature support varies by platform. The DW Gen3 reports open and close status everywhere and battery status on every platform except Alexa, but Sonoff’s manual says tamper status isn’t available in Thread mode on any platform, so tamper alerts need Zigbee mode on a gateway that supports them.

Sonoff SNZT-04P Features Comparison Per Platform
Sonoff Door Sensor Version Differences with Thread and Zigbee

The Motion Gen3 reports motion everywhere and light intensity on every Matter platform, but battery status only reaches Google Home, SmartThings and Home Assistant. At the moment, Home Assistant is the only platform that exposes the Motion Gen3 cooldown and the identify function.

Obviously, Zigbee mode works with Sonoff gateways such as the ZBBridge-P, ZBBridge-U, NSPanel Pro and iHost, and with ZHA or Zigbee2MQTT through Sonoff’s dongles. ZHA and SmartThings currently need custom scripts from Sonoff to connect, which are trivial to add for enthusiasts.

With Alexa’s Zigbee support, the DW Gen3 loses tamper and battery reporting, and the Motion Gen3 loses illuminance and battery reporting. Both sensors support up to five Matter fabrics, and holding the button for five seconds opens a pairing window without leaving the Thread network. Holding it for 10 seconds triggers a factory reset, which also removes all Matter fabrics. The main trade-off is that tamper alerts and some configuration need Zigbee mode or Home Assistant, while Thread mode avoids needing a Sonoff gateway.

Firmware updates over Matter currently work only in Home Assistant. On other platforms, you update the sensors through the eWeLink app over Bluetooth by pressing the button three times, which works in both Thread and Zigbee mode.

Pricing and Availability

Two of the three new SenseGuard sensors are already available to buy directly from Sonoff’s official online store and Amazon:

  • SenseGuard DW Gen3 (SNZT-04P): Available now for US$22.90 (€22.90 in the EU store), as well as on Amazon for US$22.90, £19.63 in the UK and €22.90 in Germany.
  • SenseGuard Presence Core 24G (SNWF-06P24): Available now for US$24.90 on Sonoff’s online store (€24.90 in the EU store), as well as on Amazon for $24.90 in the US, £21.34 in the UK, and €24.90 in Germany.
  • SenseGuard Motion Gen3 (SNZT-03P): Expected to launch in late November for €24.90/US$24.90.

Alongside the Thread models, the Matter over Wi-Fi Presence Core 24G runs on an ESP32-C6 and uses 24 GHz radar to cover up to 4 meters across seven individually toggleable zones. Its Detection Calibration learns and filters out fixed movement sources like fans, though it cannot filter out pets or robot vacuums, and Sonoff notes it cannot reliably detect a sleeping person. Over Matter, it exposes occupancy and illuminance to Apple Home, Google Home, SmartThings, Home Assistant, and Alexa.

More from News