1259 Total devices
Ko-Fi

Sensereo Smoke and CO Alarm MSC-1

Sensereo Smoke and CO Alarm

Device Info

Manufacturer:
Model:
Protocol:
Thread Role:
Vendor ID:
Product ID:
Certificate ID:
Date Certified:
Matter Version:
Device Type:
AK-960SCM
End Device (MTD)
0x1596
0x0002
CSA2569FMAT46577-24
29.08.2025
1.4

Available from

Amazon.com
Amazon.co.uk
‎Amazon.ca
Amazon.de
Amazon.‎nl
Amazon.fr‎
Amazon.it‎
Amazon.es‎
Amazon.se‎

Notes and annotations

N/A

Matter Protocol

The Sensereo Smoke and CO Alarm MSC-1 from Sensereo uses Matter over Thread to connect to your smart home. Thread is a low-power mesh network built for devices like a Smoke & CO. Devices pass messages to each other, so the mesh gets stronger and reaches further with every router you add.

In a Thread network, the Sensereo Smoke and CO Alarm MSC-1 works as a End Device (MTD).

Border Router (TBR)

A Thread Border Router connects your Thread devices to your home network, so no extra hub is needed.

Router (FTD)

A Thread Router stays powered on and relays messages for other devices, extending the range of your network.

End Device (MTD)

A Thread End Device talks to nearby routers and does not relay messages, which saves power and battery life.

Every Thread router you add makes your mesh stronger and extends its range. See all Thread devices →

Matter Version

Matter 1.4

The Sensereo Smoke and CO Alarm MSC-1 is certified on Matter 1.4, released in November 2024. It added solar panels, batteries, heat pumps, water heaters and home routers with Thread built in. It also brought energy management, easier multi-platform setup and longer battery life for sensors.

Frequently Asked Questions

Does the Sensereo Smoke and CO Alarm MSC-1 need a smart hub?

Yes. The Sensereo Smoke and CO Alarm MSC-1 needs a Thread Border Router to reach your home network, plus a Matter controller from your platform. Most devices handle both, like a HomePod mini, Google Nest Hub (2nd gen) or Amazon Echo (4th gen). See all border routers

Does the Sensereo Smoke and CO Alarm MSC-1 work without internet?

Yes. Matter runs on your local network, so the Sensereo Smoke and CO Alarm MSC-1 keeps working when your internet goes down. Remote access, voice assistants and some Sensereo cloud features may still need a working connection.

Does the Sensereo Smoke and CO Alarm MSC-1 work with Apple Home, Google Home, Alexa and Home Assistant?

Yes. The Sensereo Smoke and CO Alarm MSC-1 is Matter certified, so it works with Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant, as long as the platform supports Smoke & CO devices. Support for newer device types can differ per platform.

Do I need the Sensereo app to use the Sensereo Smoke and CO Alarm MSC-1?

No. Any Matter hub can set up and control the Sensereo Smoke and CO Alarm MSC-1 without the Sensereo app. Some advanced features may not be part of Matter yet, so settings like firmware updates or special modes can still require the Sensereo app.

How do I set up the Sensereo Smoke and CO Alarm MSC-1?

Open your smart home app, choose to add a device and scan the Matter QR code on the Sensereo Smoke and CO Alarm MSC-1 or its packaging. You can also type in the 11-digit Matter code instead. The app guides you through the rest. Keep the code safe, you need it again after a reset.

Noticed an error? Submit a correction form.