1259 Total devices
Ko-Fi

Aqara LED Strip T2

Aqara LED Strip T2

Device Info

Manufacturer:
Model:
Protocol:
Thread Role:
Vendor ID:
Product ID:
Certificate ID:
Date Certified:
Matter Version:
Device Type:
LS-L05/LS-L06/LS-L07
Router (FTD)
0x115F
0x1827
CSA24687MAT44346-24
16.10.2024
1.3

Notes and annotations

An RGB and tunable white LED strip with individually controllable segments and up to 1750 lm brightness. Available in 3 m / 9.8 ft (LS-L05D, LS-L05E), 5 m / 16.4 ft (LS-L06D, LS-L06E) and 10 m / 32.8 ft (LS-L07D, LS-L07E) lengths. The D and E versions are sold through different channels.

Matter Protocol

The Aqara LED Strip T2 from Aqara uses Matter over Thread to connect to your smart home. Thread is a low-power mesh network built for devices like a Light Strip. Devices pass messages to each other, so the mesh gets stronger and reaches further with every router you add.

In a Thread network, the Aqara LED Strip T2 works as a Router (FTD).

Border Router (TBR)

A Thread Border Router connects your Thread devices to your home network, so no extra hub is needed.

Router (FTD)

A Thread Router stays powered on and relays messages for other devices, extending the range of your network.

End Device (MTD)

A Thread End Device talks to nearby routers and does not relay messages, which saves power and battery life.

Every Thread router you add makes your mesh stronger and extends its range. See all Thread devices →

Matter Version

Matter 1.3

The Aqara LED Strip T2 is certified on Matter 1.3, released in May 2024. It added energy reporting for any device, plus EV chargers, water valves, leak and freeze sensors, ovens, cooktops, microwaves, extractor hoods and dryers. Scenes also became part of the standard.

Frequently Asked Questions

Does the Aqara LED Strip T2 need a smart hub?

Yes. The Aqara LED Strip T2 needs a Thread Border Router to reach your home network, plus a Matter controller from your platform. Most devices handle both, like a HomePod mini, Google Nest Hub (2nd gen) or Amazon Echo (4th gen). See all border routers

Does the Aqara LED Strip T2 work without internet?

Yes. Matter runs on your local network, so the Aqara LED Strip T2 keeps working when your internet goes down. Remote access, voice assistants and some Aqara cloud features may still need a working connection.

Does the Aqara LED Strip T2 work with Apple Home, Google Home, Alexa and Home Assistant?

Yes. The Aqara LED Strip T2 is Matter certified, so it works with Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant, as long as the platform supports Light Strip devices. Support for newer device types can differ per platform.

Do I need the Aqara app to use the Aqara LED Strip T2?

No. Any Matter hub can set up and control the Aqara LED Strip T2 without the Aqara app. Some advanced features may not be part of Matter yet, so settings like firmware updates or special modes can still require the Aqara app.

How do I set up the Aqara LED Strip T2?

Open your smart home app, choose to add a device and scan the Matter QR code on the Aqara LED Strip T2 or its packaging. You can also type in the 11-digit Matter code instead. The app guides you through the rest. Keep the code safe, you need it again after a reset.

Noticed an error? Submit a correction form.