
Device Info
Available from
Notes and annotations
N/A
The Complete Matter Device List

N/A
The TP-Link Tapo HomeBase from Tapo connects to your smart home over Ethernet. It plugs straight into your router or network switch, and your Matter controller reaches it over your local network, without a Thread Border Router or extra hub.
Wired and Stable
A network cable gives the most stable connection, with no Wi-Fi interference, range limits or dropouts.
Same Network
Your phone, your controller and the device must be on the same network. Guest networks and separate VLANs can block Matter.
Network Port
Matter over Ethernet devices need a free LAN port on your router or network switch.
Every Matter device needs a Matter controller, like a smart hub, display or speaker. See all Matter hubs →
The TP-Link Tapo HomeBase is certified on Matter 1.0, the first release from October 2022. It covers the core smart home devices: lights, plugs, switches, locks, thermostats, blinds, sensors, TVs and bridges, all running over Wi-Fi, Thread or Ethernet.
Yes, but only a Matter controller from your platform, not a separate bridge. The TP-Link Tapo HomeBase connects straight to your home network. The controller can be an Apple home hub, a Google Nest speaker, an Amazon Echo or Home Assistant.
Yes. Matter runs on your local network, so the TP-Link Tapo HomeBase keeps working when your internet goes down. Remote access, voice assistants and some Tapo cloud features may still need a working connection.
Yes. The TP-Link Tapo HomeBase is Matter certified, so it works with Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant, as long as the platform supports Matter Hub devices. Support for newer device types can differ per platform.
No. Any Matter hub can set up and control the TP-Link Tapo HomeBase without the Tapo app. Some advanced features may not be part of Matter yet, so settings like firmware updates or special modes can still require the Tapo app.
Open your smart home app, choose to add a device and scan the Matter QR code on the TP-Link Tapo HomeBase or its packaging. You can also type in the 11-digit Matter code instead. The app guides you through the rest. Keep the code safe, you need it again after a reset.
Noticed an error? Submit a correction form.