Nanoleaf Outdoor String Lights

The Nanoleaf Outdoor String Lights from Nanoleaf connects to your smart home over Wi-Fi. It joins your existing network directly, without a Thread Border Router or extra hub, and your Matter controller reaches it through your home router.

Wi-Fi Band

Most Matter Wi-Fi devices only connect on 2.4 GHz. If your router combines 2.4 and 5 GHz under one SSID, split them to avoid issues.

Same Network

Your phone, your controller and the device must be on the same network. Guest networks and separate VLANs can block Matter.

Power Use

Wi-Fi uses more power than Thread, so most Matter over Wi-Fi devices run on mains power instead of batteries.

Every Matter device needs a Matter controller, like a smart hub, display or speaker. See all Matter hubs →

Matter Version

Matter 1.2

The Nanoleaf Outdoor String Lights is certified on Matter 1.2, released in October 2023. It added nine device types: refrigerators, air conditioners, dishwashers, washing machines, robot vacuums, smoke and CO alarms, air quality sensors, air purifiers and fans.

Frequently Asked Questions

Does the Nanoleaf Outdoor String Lights need a smart hub?

Yes, but only a Matter controller from your platform, not a separate bridge. The Nanoleaf Outdoor String Lights connects straight to your home network. The controller can be an Apple home hub, a Google Nest speaker, an Amazon Echo or Home Assistant.

Does the Nanoleaf Outdoor String Lights work without internet?

Yes. Matter runs on your local network, so the Nanoleaf Outdoor String Lights keeps working when your internet goes down. Remote access, voice assistants and some Nanoleaf cloud features may still need a working connection.

Does the Nanoleaf Outdoor String Lights work with Apple Home, Google Home, Alexa and Home Assistant?

Yes. The Nanoleaf Outdoor String Lights is Matter certified, so it works with Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant, as long as the platform supports Light Bulb, Light Strip, Outdoor Light devices. Support for newer device types can differ per platform.

Do I need the Nanoleaf app to use the Nanoleaf Outdoor String Lights?

No. Any Matter hub can set up and control the Nanoleaf Outdoor String Lights without the Nanoleaf app. Some advanced features may not be part of Matter yet, so settings like firmware updates or special modes can still require the Nanoleaf app.

How do I set up the Nanoleaf Outdoor String Lights?

Open your smart home app, choose to add a device and scan the Matter QR code on the Nanoleaf Outdoor String Lights or its packaging. You can also type in the 11-digit Matter code instead. The app guides you through the rest. Keep the code safe, you need it again after a reset.