The Complete Matter Device List
N/A
The Eltako Impulse Switch ESR64PF-IPM from Eltako connects to your smart home over Wi-Fi. It joins your existing network directly, without a Thread Border Router or extra hub, and your Matter controller reaches it through your home router.
Wi-Fi Band
Most Matter Wi-Fi devices only connect on 2.4 GHz. If your router combines 2.4 and 5 GHz under one SSID, split them to avoid issues.
Same Network
Your phone, your controller and the device must be on the same network. Guest networks and separate VLANs can block Matter.
Power Use
Wi-Fi uses more power than Thread, so most Matter over Wi-Fi devices run on mains power instead of batteries.
Every Matter device needs a Matter controller, like a smart hub, display or speaker. See all Matter hubs →
The Eltako Impulse Switch ESR64PF-IPM is certified on Matter 1.2, released in October 2023. It added nine device types: refrigerators, air conditioners, dishwashers, washing machines, robot vacuums, smoke and CO alarms, air quality sensors, air purifiers and fans.
Yes, but only a Matter controller from your platform, not a separate bridge. The Eltako Impulse Switch ESR64PF-IPM connects straight to your home network. The controller can be an Apple home hub, a Google Nest speaker, an Amazon Echo or Home Assistant.
Yes. Matter runs on your local network, so the Eltako Impulse Switch ESR64PF-IPM keeps working when your internet goes down. Remote access, voice assistants and some Eltako cloud features may still need a working connection.
Yes. The Eltako Impulse Switch ESR64PF-IPM is Matter certified, so it works with Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant, as long as the platform supports Switch Module devices. Support for newer device types can differ per platform.
No. Any Matter hub can set up and control the Eltako Impulse Switch ESR64PF-IPM without the Eltako app. Some advanced features may not be part of Matter yet, so settings like firmware updates or special modes can still require the Eltako app.
Open your smart home app, choose to add a device and scan the Matter QR code on the Eltako Impulse Switch ESR64PF-IPM or its packaging. You can also type in the 11-digit Matter code instead. The app guides you through the rest. Keep the code safe, you need it again after a reset.
Noticed an error? Submit a correction form.
SITE LINKS
Blog • News • About • Privacy Policy
BY PROTOCOL
Bluetooth • Thread • Wi-Fi • Ethernet
BY DEVICE TYPE
BY MANUFACTURER
DEVICE DATABASE
FOLLOW US
